|Home||» Products||» Air Ventilators||» Ventilators|
We are a widely appreciated manufacturer and supplier of a range of superior quality Ventilators. Offered ventilation products are created using cutting-edge technology and galvanized colour coated steel roll formed sections, CRCA with zinc phosphate, nylon or graded aluminum with powder coating. Part to part overlap, the gasket around glass and between shutter & frame are developed to provide perfect sealing. Frames are fixed to the concrete wall by using self expanding screws. We offer these Ventilators in varied specifications at marginal prices.
Supply and fixing of windows & top Hung ventilators made of pre - painted steel (base steel as per IS 513 of 0.58mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer.
Section for outer frame should be 46 x 52 mm section for shutter should be 46 x 46 mm section for mullion should be 46 x 70 mm, and section for beading should be 18 x 25 mm and section ventilation should be The windows should be paneled with 5mm thick plain float glass / 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM).
The sections are to be cut to length meter joined with corner brocket centre mullions are to be fixed using mullion cap. Handle made of high grade aluminum powder coated and nylon receiver. Gaskets made of Ethyl propylene Diamine monomer (EPDM). Corner brackets made of CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon.